Description

Why no reading when using the baby probe? 1.The baby probe is suitable for under 2 years old or 25 pounds. Please keep your baby still when using. 2.Sensors should be detected on the thinnest part near the little toe. 3.Check if there is a sensor glows red. If not, the probe is damaged. Why is there still no alarm sounds after exceeding the set range? 1. Check whether [SpO2] and [PR] are set to [ON] in [Alarm Setting]. 2. Check whether [Alarm Volume] in [System Setting] is set as 30. 3. Check whether displays a mute mark. If so, click the mute button in the lower left corner to cancel the mute. Why isn’t the device saving the whole night data? If you want to save data for a whole night, please set [Record Mode] to [Trend 05M]. Why is it still not charged after plugging in? If need to use the base, please check whether the charging magnet between the base and device is well placed and reposition it. If donu2018t use the base, you can directly connect the interface at the bottom of device through the USB-C charging cable.

Accurate To 1% – This is a reliable infant pulse oximeter that you can completely trust. SpO2 levels are accurate to 1% between 70-100%and heart rate(PR) is accurate to 1bpm. Keeps Alert – The handheld pulse oximeter with alarm will beep when it falls below the set threshold, or when the blood oxygen saturation is below 90%, or the heart rate is below 50bpm. The corresponding value will flash on the screen. This infant pulse oximeter will help you and your family to find out the status of the tester in time. Two Measurement Modes – pulse oximeter for baby rechargeable supports Spot-check and Trend Record. These two modes are optional to meet the needs in all scenarios. Whether adults, children or babies can be accurately measured. (Package included infant probe and adult probe) No Need To Worry About Power – The infant pulse oximeter newborn use USB-C to charge. After fully charged, the pulse ofor infants can be used continuously for 8 hours. You can also use it 24h uninterrupted and plugged in. Charging method: u2460put the pulse oximeter into the charging base. u2461Connect the base and the power supply with the USB-C cable. u2462It is charging!u25b2If the base does not work, please take out the magnetic part connected between the oximeter and the charging base and put it back. Multi-user management – Up to 10 IDs can be stored. Each user can store 300 sets of data. You and your family members can share an pulse oximeter fingertip. Independent Storage – Baby pulse oximeter infant can independently store 300 sets of data/ID. Continuous pulse oximeter can store for a total of 10 users independently. You can also choose to sync your data in real time to the app “HealthTree